Print Page - Norgren Valve Electrical Connectioin

Title: Norgren Valve Electrical Connectioin
Post by: Jan & Richard on March 15, 2021, 12:55:08 pm

I am in the process of removing the Norgren valve for my step cover and cannot figure out how to unplug the electrical wires from the body of the valve. Any insight would be appreciated. Thanks

Richard

Title: Re: Norgren Valve Electrical Connectioin
Post by: craneman on March 15, 2021, 01:39:56 pm

I just cut the 2 wires and used butt connectors when I reconnected. I moved my valve from under the steps to behind the box.

Title: Re: Norgren Valve Electrical Connectioin
Post by: Chuck & Jeannie on March 15, 2021, 02:04:51 pm

This subject was discussed here about a week ago;

Step Air Pressure Regulator (https://www.foreforums.com/index.php?topic=41855)

Title: Re: Norgren Valve Electrical Connectioin
Post by: Jan & Richard on March 15, 2021, 02:12:16 pm

Thanks for the response Chuck. Actually I just found a Phillips screw under a layer of dirt. The screw holds the electrical plug in place.
so problem solved.

I read, with interest, the thread last week. I just had not noticed information about how the electrical plug was held in place.

Richard

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: Jan & Richard on March 15, 2021, 12:55:08 pm