Hi ALL,
I am intending to pull cable in the form of Cat6 cable to the rear TV and down to the passenger side first bay (where there already is a cable and power outlet)
Because I am using new cable (cat6) I need to snake wire to both the TV areas
My thoughtsd are to run the cable to the rear TV via the driver side cabinets which have a hidden panel that is velcroed on and I can run the cable behind it. The only exception would be the by the fridge which I "think" would have to put behind the fridge, reachable from the outside panel.
The cable run from the overhead compartment to the passenger bay presents more of a challenge. Does anyone know how the original RG6 cable was run from the front to the Bay?. Where was it snaked and how do I snake the new cable there?
Any experiances or thoughts on this would be appreciated.
Am running Cat6 cause it transmits 4K signal much better over distance, and all replaced TV are going to be 4K.
This should help
Running cable from back to front (https://www.foreforums.com/index.php?topic=36631.0)
About 4 years ago I posted a couple of pictures showing the locations of the ends (entrances /exits) to the aluminum chase forming a corner of the coach.
See the topic There really is a Cable Chase!!
It gets you front to back driver's side
Other posts talk about as well.
YMMV
HTH