when the coach is running and as the air pressure climbs
above 60 psi, the sliding floor works as it should.
when the engine is off and when the air has dropped below
80 psi the floor will extend on its own. it cannot be pushed in
manually, until the pressure is much lower. regulator is 40 psi.
so when we are parked and then return to the coach after several
hours the floor will be in the extended position, making re-entry
clumsy and ungraceful. any thoughts?
i know my air leaks are still unacceptable.
Sounds like you have a leak in there valve. If you cycle the valve will the slide go back in?
Chris