Having trouble finding Nelson 84101b filters for the hydraulic tan. Anyone bought any lately?
I found mine on flee bay (Ebay)
Are you fixing the pump finally?
CW
I just bought them from moderngroup.com
They do look different from what I removed so they may not be actual Fleetgaurd brand.
Mike says look for Fleetguard #87610A (Reply #6):
what's leaking? (https://www.foreforums.com/index.php?topic=40380.msg400564#msg400564)
Hey Bruce, double-check this for cross to the Nelson 84101B
87610A | Fleetguard LUBE/HYD | The Modern Shop (https://shop.moderngroup.com/87610a-lube-hyd/)
I used part 8410BFLG (Element-PS R NELSO) from MHC Kenworth. $13 each plus tax. I picked up locally, but they will also ship.
yep made to Florida for a month going to try to put a shaft seal in it.
I buy them at Cummins
Ron you wouldn't happen to have the seal number for the hydraulic pump on a 99 vintage? Looks like 1.50 x 1.00 x .25
Yes I do somewhere. I will look it up
Part number for filters from Cummins 84101B part number for seal 3920773
Thanks Ron, but that looks like the oil plug seal I'm looking for the shaft seal for the hydraulic pump, the one behind the snap ring.
Looking for this seal? NAPA part. It is what was used behind my fan shaft snap rings.
That would be a hyd. motor not pump.
222025 national oil seal is a national oil seal #, someone on Amazon should have it. The something told me u are in Tomball, closest I think bearing house that could have it probably Purvis. On belt way
Motion industries, or Applied. Or Sepco. .
Regards. Bill, 32 yrs with federal mogul. But retired from them over 20, so things might have changed a little??
Walt, that is a 30mm ODx20mmIDx7-7.5mmthick, I got mine off eBay was a C/R. Chicago rawhide seal. But I would think any parts warehouse could get them
After re-looking at numbers on box they come out to be 30/20/7
Chris
Reply14 and 15, are those seal for the pump or the fan motors? I'm looking for the pump seal.
My mistake, for the fans.
thanks I'll keep that info though