So the good news is that I am now intimately familiar with the inner workings of a microphor toilet.
The bad news is that Spending all summer in Phoenix must have destroyed the gasket that sits in front of the solenoid plunger. When the water pressure is turned on it's spews water Where the solenoid meets the plastic housing That the water runs into. I tried everything I could think of including taking it apart and shooting plumbers grease in there and couldn't get it to seal so I think it's time for a new one.
Can we still get these parts? Has anyone battled this one before?
Video link: Imgur: The magic of the Internet (https://imgur.com/a/CWwWBcT)
https://mullaney-associates.com/product/solenoid-valve-assembly-12v-dc/
Welcome back to the jungle!!!
I've been there, but all my working parts sit on the floor in the cabinet behind the toilet.
I've been there, but all my working parts sit on the floor in the cabinet behind the toilet. I had to put in a leak detector back there.
Dometic 320
Wish i had the room like you do. I would convert to the manual
Amazon.com: Dometic 302320081 320 Series Standard Height RV Toilet, White :... (https://www.amazon.com/Dometic-Standard-Height-Toilet-White/dp/B00HQEKGB6/ref=sr_1_2?crid=2YM8FCZR5JMJF&dchild=1&keywords=dometic+320+toilet&qid=1630878238&sprefix=Dometric%2Caps%2C240&sr=8-2)
I'm going to anyway but much more involved to make it work
Scott
Yikes I'm getting scared again