I removed my King Controls (2600) to repair an internal ground. Reassembly and hooking it all back up, the 3 wire foot throttle plug, no problem. The 2 large plugs, no problem.
The TPS 3 wire plug is my issue. The plug end was gone and they twisted wires together KC side black wire , white wire. There are 3 green wires, 1 red wire coming from the ECU.
Not sure which of the 3 green wires goes to the TPS black wire and TPS white wire. Any help appreciated! TY
It's a little confusing with the color changes. Here is my note on that wiring in my rig and the Foretravel drawing.
jor
CHASSIS (female) KING (male)
135A green ---------------- black/white
156 blue ----------------- white
124 red XXX
203 green XXX
King uses 135A and 156 (124 & 203 are not connected)
King changes black/white to black to connect to chassis 135A
King stays with white to chassis 156
All four of these wires are numbered. Have to look closely.