Hi everyone,
I have a residential fridge.
I took off the frame to the vent cover on the side of the coach for the fridge to make sure it was sealed properly.
What should I use to reseal the frame to the coach before I secure it with the screws?
Thanks
I use 3M 4000UV sealant for those types of tasks.
My go to being an old body guy is windshield urethane (heavy bodied). Stuff is extremely tough and will never come loose and also easy to find. I did replace my vent with a watertight door to take away possibility of future leaks through vent door.
Larry
When we replaced our Dometic with Samsung, we also placed foil tape on the inside of that cover to cover up the holes.
I cleaned up around the opening, painted area, then used the blue painters tape. Followed that with foil tape about 1/8 " inboard of the blue tape and went up the rigid insulation about 3".
Don't want to secure the frame with anything difficult to remove just in case.