my ge advantium microwave has no power i opened it up found the main power fuse and it checks ok what is next
what have people replaced this mocrowave with
Make sure you check the 120v circuit breaker. This would not have been an OEM MW/Convection oven.
Replace it if needed with the same one or one that fits.
Brian,
Check to see if the 120 volt surge protector in the outlet behind the microwave has quit.
Jim
2002 U320 42'
As Roger has said but also check to see if it is plugged in. I have a 2004 U320 and the plug-in for the GE Advantium is in the cabinet above and to the right. Hope it is the breaker or not plugged in so it is an easy fix.
Good luck!
Oscar
Is yours a convection oven/microwave? If it is there is a high temp cutout sensor that tripped on mine twice. Have to pull the unit to replace the cutout sensor. It kills power to the entire unit when it goes out. It is a safety device to keep unit from over heating.
May be your issue if you have verified power to the unit is good.
Mine went out last year. Simple fix.
are any of yours in the slide? How do you get to the top bolts to remove it?