Folks,
Reaching out for a clue on what is between the water pump relay and the pump's pressure switch mounted on the pump.
I've got voltage out from the relay, and the wire seems to go in the washer/dryer area. By the time it gets to the pump, there's no voltage. It's a red wire that is not on any drawings I have. That said, the B-2126 drawing I do have refers to drawings B2179, B2197, B2198, AND B2235, none of which I have. If, in fact, you possess these drawings, could you share them? I'm a decent troubleshooter and just need some reference material to continue my quest to conquer this!
Thanks,
Dave
It will be somewhat build-number dependent, but try looking in the Forum schematic repository here:
https://www.foreforums.com/index.php?action=media;sa=album;in=194
(And if anyone has PDFs of schematic pages and other drawings, particularly in addition to the "standard ones" in the Owner's manual, please try to upload them to the relevant section:
https://www.foreforums.com/index.php?action=media;sa=album;in=165
Here is two of the drawings.
A forum search (Community -> Search) pulled up this this potentially-useful post and topic Pump Switch (https://www.foreforums.com/index.php?topic=37181.msg356155#msg356155)
Thanks to all! I'm getting closer.
All the switch lights are on as they should be. My Red B29 (B2179, 2197) wire is not connected to the relay, B29 (B2126) white is. Somewhere after the relay it changes from white to red.