I have a 2001 36' U320 that I want to do some servicing on. I've got my 2in square tubing and know where to block on the rear of the coach. I was hoping that someone with an IFS front could tell/show where and what to use for keeping the coach up in the raised position so I can safely get underneath. TIA.... James
James,
I found a single repeat of your question that was asked two years ago, and sadly never received an answer. I HOPE we can do better this time...
Working Safely around your Foretravel (https://www.foreforums.com/index.php?topic=10632.msg441294#msg441294) (Reply #110)
Something to check while you are working on your front end:
Bad noise in front end. 2001 U320--Update (https://www.foreforums.com/index.php?topic=16607.msg107063#msg107063)
I went and bought some 2x12 lumber. Cut in 2' sections. I then raise front with air bags. then slide /stack the 2x12's under the front cross members. On my coach I have two front cross members. I use one set of blocks across both cross members at each side close to the A Arm. I was concerned about the weight and tried to distribute it over a greater area.