Text only | Text with Images

Foretravel Owners' Forum

Foretravel Motorhome Forums => Foretravel Tech Talk => Topic started by: bbeane on May 08, 2023, 03:02:14 pm

Title: Hart interface Link 2000
Post by: bbeane on May 08, 2023, 03:02:14 pm
I am still running the factory original battery/ charging, link 2000.
Here's the question I have 750 amp hours of AGM batteries. For monitoring the link wants to know the amp hour capacity of the battery bank. Right now mine is set at 325 Ah (50%) DOD. In reality should it be set at 750AH
Title: Re: Hart interface Link 2000
Post by: oldguy on May 08, 2023, 03:10:20 pm
I would set it for 750 AH
Title: Re: Hart interface Link 2000
Post by: rbark on May 08, 2023, 05:00:18 pm
What Peter said.
Title: Re: Hart interface Link 2000
Post by: Lon and Cheryl on May 08, 2023, 05:12:44 pm
I had the same question last week when programming my Victron Multi and color control.
I have a total of 4000 amps at 6 volts with my Lifeline battery's, 400 amp hr @20% each x 10.
I adjusted to 12v so I have 2000 amps @12v. At a 50% discharge I have 1000amps.

I contacted Bay Marine supply where I bought my Victron equipment. I was advised to set the battery capacity to 2000amps.
Title: Re: Hart interface Link 2000
Post by: bbeane on May 08, 2023, 10:43:30 pm
Well found my issue, one of my 8D AGMs has a problem. Took it out of the system everything back to normal. I'll run in the other 2 this summer and do lithium when I get back to Yuma this fall.
Text only | Text with Images