Thanks to the forum members for your assistance with the installation of my new backup camera and monitor. Installation is complete and working fine and I am pleased with it. A big improvement over what I had in quality of picture as well as aesthetics of the dash. I installed the Amtifo wireless rear view camera kit from Amazon. A lengthy project as I wanted to clean up the rats nest of wiring that was under the dash. I removed the radio entirely as never listen to it anyway and installed a radio hole Cubby which will be more useful for me.
Bill
Am in the process of changing over my monitor as well as install rear and side cameras. Did you re use your javelina computer to broadcast your tank levels on your new monitor? I am, and am having some connectivity issues with the output from the javelina to the monitor. If so could you pm me as I have some questions
Peter
Getting rid of that monitor sure makes for more room. I got rid of mine when I put the seelevel system in
as a previous owner had put a new monitor in, so all the Javelin did was used for was checking the tanks
and it wasn't working very well.
I put the Seelevel in the hole where the Javelin was.
Peter, I installed the SeeLevel a couple years ago. Works very well. My old Javelina system was toast and nothing worked. I also removed the interface box for the side cameras that original owner installed. It had failed and all I could see in my Panasonic monitor was the left side camera (that's what started this whole thing). I did not like the side cameras and never looked at them so didn't replace the interface box. The new system works very well for me. Sorry I can't help with your interface issue. Hopefully someone will chime in with a solution for you. Good Luck!