Well all the switches have been working until this morning and now the bath bedroom bedroom lights work but the living room and kitchen buttons light up when pressed but the lights don't come on. Water pump and Water heater work also so one module is working correctly but the other two aren't.
Ok so I just removed power momentarily with the battery disconnect and now everything is back fully operational.
I am wondering why though....
Computers. When software gets corrupt reboot is first response. May or may not ever happen again
Following. I have lots of erratic operation with my Intellitec. Someone posted here before about reprogramming the switches but not a lot of specifics.
I have worked out the reprogramming of the switch panels. Feel free to reach out with questions. We had multiple keypads that would lose programming early on when we bought the coach. We haven't had any issues in the last couple of years. It may have been due to low battery voltages or battery disconnects. I never could figure out why it happened.
There is another member who modified one of their keypads with external relays they could control via Alexa.
Thanks Bruce we are at MOT and there might have been a power hit during the night. The good new is all is well today and I now have your contact and the info from the Inteletec sight if needed in the future.