I was attending to a leak from my microphor below the toilet and took the electrics and vacuum breaker out for access. In doing so the clear small tube attached to the vacuum breaker came off from somewhere on the bottom of the toilet. The tube is still attached to the vacuum breaker but is disconnected below. It has a small threaded end on it but for the life of me I can not find where it connects. The pictures in the manual are unclear. I do know when the toilet flushes with the water on, the tube blows water ( I know I got soaked). Can anyone advise where that attaches to the base of the toilet??? I can not locate it. I do want to replace the toilet eventually but for now it works fine
This is better than trying to explain.
Mike
Interesting
I do not have one of those on my microphor
Peter,
If it isn't in that 90 where the bowl overflow attaches then you will have to look close around the hopper for an attachment hole. That water has to be discharged to the black holding tank. Be aware that a previous owner could have been creative and moved that hose for some reason.
Mike