Does anyone have the part numbers for a replacement belt and tensioner on a 99 U270 with the 350hp engine?
I think I have a little too much rapid movement in the tensioner at idle, and the way things are at the moment, I better do all I cal to make sure the pump is not been damaged by bad lateral load forces.
Thanks
David
On Beamalarm 1999 U270 8.3 Cummin
http://beamalarm.com/Documents/replacing_hydraulic_pump_tensioner.html
Belt Gates K080465
NAP 25-0604650
TENSIONER
GATES 38504
There a video on his site
Rick
Thank you!
Will get it ordered this evening, keep warm up there!
Danid
Here's another verification of the part numbers with a bit more additional info:
Part Number Collection (https://www.foreforums.com/index.php?topic=11472.msg129143#msg129143)
Got the replacement tensioner and "green" belt on the way. Amazon was really well priced, the tensioner on Amazon has only gone up $2 in 10 years to $101, and the belt has doubled to $54.
Thanks for the advice and the part numbers.
The comments on the heavy duty belt: is well worth the extra $15.
I figure anything that may extend the pump life is worth the effort!
Rockauto has the best price on the tensioners, BUT unless your ordering some other stuff there at the same time, you do have to pay shipping.
More Information for GATES 38504 (https://www.rockauto.com/en/moreinfo.php?pk=295701&cc=0&pt=11659&jsn=279&_nck=ZExt1ysfqhqWnq%2BEvUNdS3Txyey60IDtnjPWF5UU9J0BWQv7pvqZbh%2BYrdIIoJ2QVm1wiaiI%2B%2Bo3vjMjN%2Fscq3njoEn03pcGL3JVL3SQ9pzj6wlFfcbFIvUZTrQbIOhSZok5lgJ3iTSiFLXxQB5xQXjSzTiVCMRZ7vZGp7fGGaTX6GdwkZY%2Bhc5pO75hMJ4ker0Idv4EslpOdXO6dBLHMdR98JcsVzehpdMkRC7PxJNshpcAWv8t2Yy8ck%2FATya67ujXpv2o5oMeLojruM%2B6NuEQCoV5svQzN7pArj0dk4ziEvPltJl6vBJgEGjbK7ui)
Remember when shopping for parts, be very careful to get OE quality parts. Way too many of the "replaces ...." , may be cheap, and ARE cheap.
Yes, it is getting harder and harder to tell what is a knockoff part and what is OE quality. If the prices is "too good to be true", it probably is.