While wiring up the new water fill valve I managed to pop (break?) the DC 12 volt 15 amp breaker/fuse under the large grey cover in basement drivers side. I verified the problem with a temporary jumper (30 second test). Photo atchd
How do I replace that breaker? Does entire copper bar at left side have to come off? Safe guards if that is the case?
Is this part available at hardwware stores or auto parts store?
Will do a search of forum a bit latter - have another task to complete first.
To replace the breaker you will need to remove the copper bar and yes they are ready available.
They should reset themselves when they cool down. There are some that have a little button on
them to reset them.
Thanks!! I was aware some had reset buttons but was only looking on the face. On the left side hidden by the copper bar there was a reset button and we are operational again!