Where o where is that switch that tells the HWH that the slide is in? Have E-W oriented bedroom. Have had several incidents where the room is in but can't get the transmission to go into gear. Recycling has so far allowed driving but.......
thanks
Jerre
Our previous 02 Windsor had slim s/s device on front of slide that indicated slid was in Hope that helps
The thick bedding on our bed interfere with the slide coming in that last little bit enough to cause the same trouble. Once I recognized it we would flip the bedding up onto the bed and never had another issue! Talk about an easy fix...
That was in our previous 06 Nimbus not our current 04 295....
We have the same bed, the bedroom slide should be on side by closet (rear) of the frame. The sensors are magnet and our out sensor
was loose or movable, we had to sturdy it with a board. Also if you have not checked your bolts under the bed on the slide, they are famous for breaking.