I need 3 lugnut caps for my factory Alcoa wheels, 1996 . stops don't have them. Any ideas
I found them on Amazon
Amazon.com: Alcoa Hex Lug Nut Cover for Two-Piece Flange Nut (001881 10 Pack... (https://www.amazon.com/Alcoa-Cover-Two-Piece-Flange-clamps/dp/B01MCT6O3I/ref=sr_1_18?crid=1ZJ4L5S15O5Q0&keywords=lug+nut+caps+for+my+factory+alcoa+wheels&qid=1708053820&s=automotive&sprefix=lugnut+caps+for+my+factory+alcoa+wheels%2Cautomotive%2C385&sr=1-18&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc)
Those are for 33MM nuts not 1 1/2 that a '96 would have. These would work.
Amazon.com: GG Grand General 10038SP 1-1/2 X 2 Inches Chrome Nut Cover :... (https://www.amazon.com/Grand-General-10038SP-Chrome-Bullet/dp/B00FS6625I/ref=pd_lpo_sccl_1/141-5894122-3255757?pd_rd_w=5M2PI&content-id=amzn1.sym.1ad2066f-97d2-4731-9356-36b3edf1ae04&pf_rd_p=1ad2066f-97d2-4731-9356-36b3edf1ae04&pf_rd_r=4NEBJBK4QQRP7YQ848Z8&pd_rd_wg=HrceL&pd_rd_r=f44f8141-0052-4d43-8322-974765a8bc6e&pd_rd_i=B00FS6625I&th=1)
FOT parts has the caps for my 2003 U320. Not sure if yours are the same.
Nearly 1k for a complete set with tag axle... mmh... I think I need to treat my hub caps a little more gently next time I pull them.
Maybe hijacking the post a bit but I have seen covers that go over your chrome lug nuts to show a clean look for the front and rear wheels. Anyone have the info I where to get those?
Try Amazon.ca and type in (wheel nut caps) and there is both screw and push on nut covers in
there. I also saw a whole big box in Inland Kenworth here is Burnaby so also try a truck shop.
Peter,
Are you talking about these. Big Rig Chrome Shop - Semi Truck Chrome Shop, Truck Lighting and Chrome... (https://www.bigrigchromeshop.com/cover-up-hub-covers-for-22-inch-stud-piloted-wheels-p-80010.html)
Shop around for the best price.
Mike
001501 by ALCOA - Wheel Nut Cover - For 1.5" Hex Stud-pilot Nut, Chrome (https://www.finditparts.com/products/7379409/alcoa-001501)
Alcoa 1-1/2"Hx Nut/Ball Seat-Bulk ID: 001501ALU | Peterbilt Parts (https://peterbiltparts.com/product/alcoa-1-12hx-nutball-seat-bulk-1501)
Alcoa Hug-A-Lug Push On Nut Cover 1.5" Stud Pilot Hex Nuts (Single) – Buy... (https://buytruckwheels.com/products/alcoa-hug-a-lug-push-on-nut-cover-1-5-stud-pilot-hex-nuts-single)
Alcoa Hug-A-Lug Push On Nut Cover 1.5" Stud Pilot Hex Nuts (Single) – Chrome... (https://chromewholesale.com/products/alcoa-hug-a-lug-push-on-nut-cover-1-5-stud-pilot-hex-nuts-single)
They are a little pricey for what they are, but if you want them to match, these are what came with your coach
Pam and Mike,
Yes those are what I am after. The price though is outrageous...
If you decide to drop the dime to get the full covers get the real wheels NOT the tcane brand. My coach came with the tcane and yes they are nice but the bolt used to attach them is hard to get to on the drive and tag wheels and is a Allen head bolt that is easy to strip..... Just my .02.
Keith
I found them by a part number on the cap. Alcoa 0001501.
FT has them or other places. $6 bucks each plus shipping
Have a look at the Iowa80 website and you'll find all things chromed, they'll ship to you.