I am having a new compressor installed for my dash ac.
While they were taking the old one off they broke the fitting as it was frozen. See picture.
It is the one which comes off the high pressure line.
The fitting has a service port and a high pressure electrical sensor.
It almost appears as though it was fabricated.
Does anyone know where I can get this fitting?
Thanks
Rick,
Those are old Beadlock fittings and they were factory made that way. This is where I get my fittings from. Shop around for the best price with the part number.
Beadlock A/C Fitting - Atco SB3-8141, Truck Air 08-6982BS, MEI 4457S (https://www.truckac.com/fitting-beadlock-sb3-8141-t1778.html)
Mike
Thanks so much. I also need the pully that is right below the compressor. I went to a Cummins repair shop and because it's an add on they don't stock it.
If the bearing is shot on our coach you can press the bearing out and press in another bearing. If the sheeve (pully) is bad those are common and should be able to be got at some place like Motion ind., Napa truck parts, or the net.
I'm pretty sure that this is the one that is on our coach Dayco V-Belt Idler/Tensioner Pulley: Direct Fit, Steel, 123 mm Diameter... (https://shop.advanceautoparts.com/p/dayco-v-belt-idler-tensioner-pulley-direct-fit-steel-123-mm-diameter-89034/15130010-P?c3ch=PLA&c3nid=15130010-P&adtype=&product_channel=Online&store_code=&&&&&msclkid=74dbfe93a2b91521d1f598cbd8601e41&utm_source=bing&utm_medium=cpc&utm_campaign=b_shopping_all_cooling%2Fsystem_gen_gen_gen_evergreen_eng_aap_us_all&utm_term=4580221855580126&utm_content=Bing_All_Cooling%20System%20-%20Parts%20%26%20Components_Belt%20Systems&gclid=74dbfe93a2b91521d1f598cbd8601e41&gclsrc=3p.ds)
Mike