Skip to main content ↑ ↓
Topic: 12.2V (Read 873 times) previous topic - next topic

12.2V

Sifting through some older threads...  want to verify

Is 12.2 Volts about the right setting for the AutoStart on my generator?
Chris & Susan
Formerly Owners of
2007 Nimbus

Re: 12.2V

Reply #1 –
 
Quote from: Chris Greco

Sifting through some older threads... want to verify

Is 12.2 Volts about the right setting for the AutoStart on my generator?

Thats what I have mine set at.
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: 12.2V

Reply #2 –
Barry did you also set a voltage level for it to stop the gen?
Chris & Susan
Formerly Owners of
2007 Nimbus

Re: 12.2V

Reply #3 –
 
Quote from: Chris Greco

Barry did you also set a voltage level for it to stop the gen?

Chris & Susan
2007 Nimbus

I believe it was 14.2vdc on my Dynagen BMC-12
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"
 

Re: 12.2V

Reply #4 –
The way I interpret the info,  and you need to read the info, yes starting genset at 12.2 is correct, and the charging system limits the upper voltage to 14.2 using Gel Cell batteries.
Just taking the battery voltage to 14.2 is not fully charged, why the generator keeps running for additional time, I think 3 hour total run time.
As mentioned, this is my understanding, and how my system works and it works very fine, however
I am certain there are brighter writers who have other opinions.
Recommend reading the manuals to to learn from the pros who have deeper knowledge on subject.
FWIW :)