Foretravel Owners' Forum For owners and Fans of Foretravel Motorcoaches September 13, 2025 ...

I just completed the generator sound insulation/fuel lines/propane tank removal/powder coating project this afternoon.  I would say the hardest part of the project was getting the generator back on to the tray, with a close second being the placement of the sound absorbing material.  What made it difficult was the spray adhesive.  Once the adhesive is applied to the material and the mounting surface, you are supposed to wait about three minutes for it to get tacky.  It becomes VERY sticky.  Once the piece of material touches the mounting surface, it's on for good; the is no second chance to reposition.  Of course, the adhesive was not the only means of adhering the material to the surfaces.  I also used two inch long stainless spikes that were bonded to the walls approximately about 16" on center.  The last picture shows the 90 degree connector I used at the top of the tank (return line) so as not to put a too tight bend in the hose.

I'm glad this project is behind me..on to the next one!