Skip to main content
Topic: part number for coolant hose (Read 723 times) previous topic - next topic

part number for coolant hose

I'm replacing the coolent hoses on my 1999 cummins 8.3 .The hoses to the coolant filter are very bad . Anyone have a part number ? Thanks Gam
joseph gambaro
1999 U295 36'

 

Re: part number for coolant hose

Reply #1
Engine Belts, Filters, Hoses and Fluids

1999


Belts:

Water Pump & Alternator ------ (1) (Gates) K080680

------------------------------------------(Cummins)3911620

Air Conditioner Compressor ------- (1) (Gates) 9476

------------------------------------------------(Dayco) 17476

Hydraulic Pump------------------ (1) (Gates) K080465

------------------------------------------(NAPA) 25-060450

Filters:

Air Filter ----------------------------Donaldson P14-8043

----------------------------------------Fleetguard AF1838M

Coolant Filter-------------------(1) Fleetguard WF2123

Primary Fuel Filter ------------------ (1) RACOR R90P

Secondary Fuel Filter ------- (1) Cummins) 3800394

Oil Filter --------------------------(1) Fleetguard LF3000

Air Dryer Filter Kit----------------------Haldex DQ6026

Coalescing Filter-------------------Haldex DQ6032
 
Transmission Filter Kit --------- (1) Allison 29526898

Hoses:

Upper Radiator Hose

Engine End ---------------------------------------- P35535

Radiator End----------------------------------------P38950

Lower Radiator Hose

Radiator End--------------------------------------- P35980

E11, Engine End 2 1/4" molded---------------P33614

Bypass Hose

Engine End -----------------------------------------P06160

---------------------------------------------Gates 4230-0135

Cooler Hose

In -------------------------------------------------------P37298

---------------------------------------------------Gates 21472

Out-----------------------------------------------------P37267

--------------------------------------------(1) (Gates) 21400

Fluids:

Oil------------------------------------------------------ 20 Qts

Transmission -------Dexron II or Dexron II / Mercon

 for ambient temperatures -30°F and up ------- 5 gl

Rear Axle - API Gear Oil GL-5, 85w140 - 32 pints

Cooling System -Extended Life Coolant -------15 gl

Hydraulic System -

 -- SAE Grade 15w40 motor oil ---------------- 23 qts

Service Intervals

Engine Oil & Filters:


Change every 10,000 miles or 6 months, whichever comes first.

(See Owners Manual for extended mileage intervals, but oil must be changed every 6 months regardless of mileage.) Use SAE 15w 40 API CE or CF-4


Fuel Filters: Every 6,000 miles


Transmission Oil & Filters: Initial at 5,000 miles, then every 25,000 miles or 18 months, whichever occurs first. Use Dexron II


Cooling System: Clean, flush, & refill every 2 years. Use pre-charge cooling system additive elements/filters. Have DCA level in coolant tested at every oil change


Coolant Filter: Supplemental additive element at each oil change.


1 Chassis Lube: Every 6,000 miles


2 Rear Axle: Initial at 1,000 miles, then yearly SAE 85W140 - API GL-5


Engine Air Filter: Check air restriction indicator daily. Replace filter when air restriction indicator locks to red or yellow diaphram enters
 red zone or yearly.

 
 
© Barry Brideau 2007-2010
We are only strangers until we meet; however, some of us are stranger than others