Skip to main content ↑ ↓
Topic: Oil Fill Tube (Read 1066 times) previous topic - next topic

Oil Fill Tube

Well, I called FOT for an Oil Fill Tube. My current one is leaking a bit and when I park on an angle it leaks more. Just started this past weekend too. Oh well, I have to say that parts said they had to make it up and the price was 62 dollars.  Wow.. that is the cheapest part I have ever put on the coach other than a bulb....

Oh well, I am glad I have a heated garage too.

2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: Oil Fill Tube

Reply #1 –
Hey John,
I found the same thing a couple of years ago. I removed the tube and blanked off the opening. It's easier and cleaner to add oil through the engine top.
The selected media item is not currently available.Bob & Faith Rozek
1997 U320 40'
Xtreme Remodel
2010 Scion XD

Re: Oil Fill Tube

Reply #2 –
Agree with removing the oil fill tube - what a mess it is. The way it's mounted in my coach, there is no way to get a funnel or container at the rear to add oil. Was going to add a cap on the engine end, and just lift the bed when I need to add oil.

Steve
1991 U225 Grand Villa

Re: Oil Fill Tube

Reply #3 –
Quote from: Merle Hench –
Agree with removing the oil fill tube - what a mess it is. The way it's mounted in my coach, there is no way to get a funnel or container at the rear to add oil. Was going to add a cap on the engine end, and just lift the bed when I need to add oil.

Steve

You may already know this but I have to make sure because putting in oil when the filler tube is stowed seams impossible on a Cummins 5.9 with a rear radiator. You can pull out the oil fill tube, sometimes with great effort, so you can pour oil in without being a contortionist. Just grab hold of the angled tube, twist back and forth and pull like crazy. It will slide out about 10" from under the grill opening so you can pour oil in easily, sort of. Push it back in when finished so you can close the grill door.

This procedure is not readily visible and the filler slide can be very hard to pull out the first time so if you don't know you will not try and wonder who in the world designed this thing.
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback

Re: Oil Fill Tube

Reply #4 –
Thought about blanking it off.  I will look at that option too.  I could still fill thru the top that way too though it would be easier if I raised the back closet floor too. 
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: Oil Fill Tube

Reply #5 –
Ya, I removed mine as well and replaced it with a standard filler plug.  The old one was messy and another place to get dirt into the engine.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: Oil Fill Tube

Reply #6 –
Don't feel bad there is a used one on E-bay for $99.00!

Keith
Keith, Joyce & Smokey the Australian Cattle Dog
1995 U320 SE Extreme 40' WTBI Build # 4780, with a Honda CR-V hopefully still following behind.
Motorcade # 17030
FMCA # F422159
 

Re: Oil Fill Tube

Reply #7 –
Quote from: Kent Speers –
You may already know this but I have to make sure because putting in oil when the filler tube is stowed seams impossible on a Cummins 5.9 with a rear radiator. You can pull out the oil fill tube, sometimes with great effort, so you can pour oil in without being a contortionist. Just grab hold of the angled tube, twist back and forth and pull like crazy. It will slide out about 10" from under the grill opening so you can pour oil in easily, sort of. Push it back in when finished so you can close the grill door.

This procedure is not readily visible and the filler slide can be very hard to pull out the first time so if you don't know you will not try and wonder who in the world designed this thing.

Wow - I did not know there was a pull out section at the end of the tube. Thank you Kent. Going to check it out.

Still don't care for that six feet of pipe that the oil has to travel along to get to the engine. And yes - my first question when I saw the arrangement, to no one in particular, was "Who came up with this mess?"  Yes - let's route the tube all the way to the farthest point possible on the engine from the fill point.  ;D

Not having driven very far as yet, I don't even know what to expect in terms of oil consumption. If it's not too often, I lean towards ditching the fill tube. However, I do envision one day perhaps lowering the bed after adding oil and inadvertantly leaving greasy handprints on the bedding.  :)

Steve
1991 U225 Grand Villa