Skip to main content ↑ ↓
Topic: Leak in cold water drain valve  (Read 573 times) previous topic - next topic

Leak in cold water drain valve

I have an increasing leak in my cold water drain valve.  I need to know the size of the manablock fitting so I can find a hardware store and cap the bottom fitting.  At least that's what I think would temporarily block my leak. Am I correct?
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Leak in cold water drain valve

Reply #1 –
Hey Caflashbob,

I replaced mine recently. It is a 1/2" Pex valve. They are available at Lowes and Home Depot. You will also need a 1/2" Pex crimping tool/rings and Pex tubing. The tubing cuts easily with a PVC cutter. 
The selected media item is not currently available.Bob & Faith Rozek
1997 U320 40'
Xtreme Remodel
2010 Scion XD

Re: Leak in cold water drain valve

Reply #2 –
Lowes & HD carry shark bite fittings.  You may be able to find a valve so equipped.  Would save on having to get crimping tools which are pricey.
Peter
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH
 

Re: Leak in cold water drain valve

Reply #3 –
When I bought my crimping tool for around $40 I though that it was probably a waste of money.  After 3-1/2 years of full timing and several instances when I needed the tool it has more than paid for its self. The Sharkbite fittings are convenient but very pricey for what they are.
The selected media item is not currently available.Bob & Faith Rozek
1997 U320 40'
Xtreme Remodel
2010 Scion XD