Skip to main content
Topic: Blown Fuse for Bay Lights (Read 793 times) previous topic - next topic

Blown Fuse for Bay Lights

I know I should know where the fuse for the basement bay lights is but I have forgotten. I shorted the circuit this afternoon when working on the light for the service bay. Where in the world is the fuse on a 93, U300. It is not in the main bay behind the white fiberglass box. I have checked those.
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback

Re: Blown Fuse for Bay Lights

Reply #1
Darn, that is where the fuse is on your old U-225, along with the refer fuse you helped me find.
Dave Cobb
Buckhorn Lake Resort The Club, #6202, Kerrville TX
check the map.  I do rent it out when I am traveling!
2001, U320, 36' #5887, in Kerrville, FT Club #17006, (7/23 to present)
2024 Jeep Grand Cherokee L, Summit, white
EX: 98 U295, 36' #5219, (mid door), (4/13-10/23)
EX: 93 U225, 36' (4/11 to 4/13)

Re: Blown Fuse for Bay Lights

Reply #2
It should be one of the circuit breakers behind that white box lid in the bay, with a lil tiny reset button.
1994 U280, Build 4490
Deming, NM.

Re: Blown Fuse for Bay Lights

Reply #3
It should be one of the circuit breakers behind that white box lid in the bay, with a lil tiny reset button.

I will check again but I sure didn't see any breakers there. I thought I heard a noise from that area when it tripped but when I removed the cover all I found was three inline fuses. All were OK. What year is your coach Twig?
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback

Re: Blown Fuse for Bay Lights

Reply #4
Kent,

On our 1997 coach, the bay lights are protected by one of those tiny little black circuit breakers behind the white cover in the big bay. They are a bit difficult to locate and reset. I use a PopSicle stick. It is non-metallic and will depress the reset buttons far enough.
J D Stevens
1997 U295 CAI 36' Build #5085
2002 Subaru Outback
Motorcade 16869
Bellville, TX

Re: Blown Fuse for Bay Lights

Reply #5
94
1994 U280, Build 4490
Deming, NM.

 

Re: Blown Fuse for Bay Lights

Reply #6
Oh, you guys with those fancy new coaches.

Hey, sure enjoyed meeting you in Quartszite. I hope we cross paths again.
The selected media item is not currently available.Kent Speers
Locust Grove, OK
1993 U300 SSE 40' (Restored at FOT 2009) Build 4323
720 watts Solar
6V92TA DDEC Silver Engine
2014 Subaru Outback