Skip to main content
Topic: Removing mold in hot water lines. (Read 772 times) previous topic - next topic

Removing mold in hot water lines.

Turns out my coach had a plugged up hot water circuit drain.  All three outlets flow slower than the cold side and after removing a hot side fitting from the manablock there is stuff in the system. 

How do I kill it and flush it without damage?

Bob
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Removing mold in hot water lines.

Reply #1
Bob,

What does it look like?  Black mould or lime deposits or...

Keith
Keith, Joyce & Smokey the Australian Cattle Dog
1995 U320 SE Extreme 40' WTBI Build # 4780, with a Honda CR-V hopefully still following behind.
Motorcade # 17030
FMCA # F422159

Re: Removing mold in hot water lines.

Reply #2
Vinegar for lime deposits, 33% hydrogen peroxide for mold (don't get it on yourself). I let the vinegar set for a couple of days.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)

Re: Removing mold in hot water lines.

Reply #3
We use CLR for lime deposits can get it at Wally world. Works on calcium, lime and rust build up.

Roland
1993 U280 4341
2010 Jeep Liberty
The Pied Pipers

Re: Removing mold in hot water lines.

Reply #4
Bob,

What does it look like?  Black mould or lime deposits or...

Keith

Black mould. 
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4

Re: Removing mold in hot water lines.

Reply #5

It is white deposits from heating water and will clog faucet strainers.

We remove propane hot water tank's drain plug and flush with wand every 2-3 months. And we are always surprised how much white cloudy water comes out when we use the flushing wand.  We use city water hose with wand on the end.
Water Heater Cleaning
Water Heater Flushing Tool : Amazon.com : Sports & Outdoors

As an Amazon Associate Foretravel Owners' Forum earns from qualifying purchases.

 

Re: Removing mold in hot water lines.

Reply #6
It is white deposits from heating water and will clog faucet strainers.
That is what I thought too, along with hard water mineral particles.  Mine got horribly plugged up.  Several gallons of vinegar later, and taking apart, and cleaning, the water regulator and faucets, things were running better.  I purchased a portable RV Water Softener and the water has been flowing great ever sense.
1994 U225
build #4514