Skip to main content ↑ ↓
Topic: how much oil for 10kw  (Read 411 times) previous topic - next topic

how much oil for 10kw

Hi
Can someone give me a quick answer on how much oil to put in my 10kw Kubota generator?
My dip stick is not original so I need to make a mark on it with the correct amount of oil.
Rick

Re: how much oil for 10kw

Reply #2 –
I changed my 2003 10KW (Kubota) oil today. I expected to need 6 quarts of 15-40.

 At 5 quarts it read full on the dipstick, even after a short run.

Your 94 could be different.

Dan - Full timing since 2009
2003 U320 40' Tag 2 slide
 

Re: how much oil for 10kw

Reply #3 –
If like our 1994 U300, it will have the PTSMH-10 10Kw generator. It should take 5.7 quarts including filter. It takes a NAPA Gold 1344/Wix 51344 Oil Filter and a Wix 33390/NAPA 3390 Fuel Filter. Fill, run and then mark dipstick.

Might use synthetic to cut down on the nasty smell at high altitudes.

Pierce
Pierce and Gaylie Stewart
'93 U300/36 WTBI
Detroit 6V-92TA Jake
1140 watts on the roof
SBFD (ret)