Skip to main content ↑ ↓
Topic: holding tank sensors (Read 591 times) previous topic - next topic

holding tank sensors

The sensor for my grey water tank has gone bad.  FT has them for $50 ea.  Anyone in the group know a more realistic supply source ?  I am traveling through Ala and Fla and will check  back when I get wifi again. Either a post on the forum or a direct message would be much appreciated.  I have an 03 320 but I think the sensors in all models since at least 2000 are probably the same.  They are actually pressure sensors as compared to the metal strip sensors used on many holding tank installations.

Thanks if you can help.
Bob Dale
05 38' 295
Tacoma 2012

Re: holding tank sensors

Reply #1 –
Bob
Did you ever find an alternative source for the sensors , 
Jimmy
2003 U295 3620
 

Re: holding tank sensors

Reply #2 –
I did not find an alternative source so I ended up getting them from FT.  Also discovered that just replacing the sensor does not solve the entire problem..The sensors have to be recalibrated for the system to function properly so I ended up with FT doing that too during a session with some other work items.

Bob Dale
05 38' 295
Tacoma 2012