ok, why is my behind the dash beeper beeping?
This one has me going in circles.
Driving northbound down the I5 Grapevine grade, just after reaching the bottom getting off the retarder and on the gas, the beeper behind the dash sounds for a couple of minutes, then goes silent.
All the gauges look fine.
I took it to Valley Power, an Allison shop, and the computer shows no stored fault codes. The dipstick shows a good level, and the atf is clear, clean, fresh smelling Transynd.
I got my vmsPC working. Today on then same run, one shorter downgrade before the last one, the retarder temp did momentarily hit 308, then dropped to 260. No beeping. On the final long downgrade, I carefully keep it in 4th and lightly use the retarder. Temp is mostly under 250, once hitting 260. At the bottom of the grade the beeper sounds again, just like before. I have everything monitored on the vmsPC, and everything is normal. At the next stop, I check for fault codes, and there are none.
So....what is going on here? I don't see this on any other downgrade.