Foretravel Owners' Forum For owners and Fans of Foretravel Motorcoaches September 11, 2025 ...

Slide Seal Vacuum

September 30, 2014, 03:16:06 pm

Where does the air go when the aux compressor creates a vacuum and deflates the slide air seal bladder? And, can you hear the air escaping from a valve somewhere? Also, has anyone ever deflated the slide seal bladder creating a vacuum with a vacuum cleaner?
Thanks, Larry

Quote Selected

Re: Slide Seal Vacuum

Reply #1 – September 30, 2014, 05:41:27 pm

The sample of the rubber seal that I have appears to be too stiff to deflate much using a vacuum.  Don't know where the air goes.

Rich

Quote Selected

Re: Slide Seal Vacuum

Reply #2 – September 30, 2014, 06:20:46 pm

On my coach there are two black valves that look like nipples sticking out in the pump compartment. That is where the air comes out.

Quote Selected

Re: Slide Seal Vacuum

Reply #3 – October 01, 2014, 09:04:10 am

I'm confused! 

I've always thought that the slide bladders were inflated to seal and just vented to deflate. 

Is there actually a vacuum pulled on the bladders?

Quote Selected

Re: Slide Seal Vacuum

Reply #4 – October 01, 2014, 09:13:14 am

Harvey, yes there is , using the same pump that inflates the bladder.

Quote Selected

Re: Slide Seal Vacuum

Reply #5 – October 01, 2014, 06:03:49 pm

Air pressure creates a vortex to vacuum the seal.  That's why the pump runs when you turn the slide key on.  John S had the answer where the air goes.  You should hear lots of air when that is going on.

Quote Selected

Re: Slide Seal Vacuum

Reply #6 – October 02, 2014, 10:56:31 am

Follow up question. Where is the vacuum generator located? Thanks, Larry

Quote Selected

Re: Slide Seal Vacuum

Reply #7 – October 02, 2014, 02:15:07 pm

On my 2003, it is tucked into the upper right corner of the forward wall of the equipment bay. Next to the Xantrex inverter/charger.

Quote Selected

Re: Slide Seal Vacuum

Reply #8 – October 02, 2014, 02:19:40 pm

It comes from your 12volt pump.

Quote Selected