Skip to main content
Topic: Aux Comp Purge Valve - help (Read 451 times) previous topic - next topic

Aux Comp Purge Valve - help

Our purge valve on the aux. comp. under the clear water bowl has a twist valve attached that I must turn to allow water to flow out of this bowl.  There is a purge valve attached but the wires connected to it are cut so it doesn't work.  Would like to repair this and am looking for a part number and wiring diagram so I can get this working again.  Have checked beamalarm and some posts here but am not finding what I am looking for.  ???

As usual your help/assistance is appreciated. 
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320

Re: Aux Comp Purge Valve - help

Reply #1
Scott, there is a solenoid valve on bottom of the bowl,which is normally open. Closes when compressor comes on.
Part # RAP6354 solenoid,n/o 1/8" 150 PSI SNGL.
I purchased mine at MOT.
I could not find it on line, maybe you can
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428

Re: Aux Comp Purge Valve - help

Reply #2
Thanks Tom for the PN.  I also need to find how/where to wire so it functions.  The wires on my unit are cut and can not see where they were attached.
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320

 

Re: Aux Comp Purge Valve - help

Reply #3
Scott, there are two wires one of which is grounded and the other goes to the pressure switch on the compressor.
There is a very good schematic on Barry's website.
'02 U295 36'
Build #5937

 SKP#104358
Motorcade#17428