Skip to main content ↑ ↓
Topic: Fittings for d2 air governor  (Read 656 times) previous topic - next topic

Fittings for d2 air governor

Was hoping that someone could tell me the description of these flare fittings.  I am ordering a new d2 and a spare was wanting to order the fittings. So that I could have the spare set up and ready to go, just in case.
Tom and Michelle 2004 U270 36WTFS

Re: Fittings for d2 air governor

Reply #1 –
Aeroquip brand air fittings,can find at Grainger,Napa,the new D2 should come with some plug fittings,use those to match threads.
96 U270 BUILD 4810
85 380SL
Drummonds TN.

Re: Fittings for d2 air governor

Reply #2 –
Take one with you to Home Depot or the like and match it up
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: Fittings for d2 air governor

Reply #3 –
I appreciate the responses. Was hoping to order online but sometimes easier to go match them up.
Tom and Michelle 2004 U270 36WTFS

Re: Fittings for d2 air governor

Reply #4 –
It is flare x pipe thread. The pipe thread is 1/8th and I think the flare is 1/4
Peter and Frieda Morin
1999 36ft. U320 Foretravel
Build # 5436
1998 Suzuki Sidekick Sport

Re: Fittings for d2 air governor

Reply #5 –
It is almost impossible to give you a part # for those fitting since we can't for sure tell you the size of the pipe thread or the flare fitting.

Need to take the part to a hydraulic hose place. I don't think Home Depot would have that. Show them the part and they will match up. 

My guess is part # 202113-4-4S
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago

Re: Fittings for d2 air governor

Reply #6 –
If your near a NAPA, they carry them
Mark & Bev
2001 U295 36' Slide
Cummins ISC 8.3 350HP
Build #5802
Jeep Wrangler Toad

Re: Fittings for d2 air governor

Reply #7 –
Home Depot does carry  those fittings; NPT( national pipe thread) X JIC fittings. Note, there are different degrees of angle for the JIC  fittings
Richard & Betty Bark & Keiko our Golden Doodle
2003 U320T 3820 PBDS
Build # 6215
MC # 16926
2016 Chevrolet Colorado 4X4 diesel

Re: Fittings for d2 air governor

Reply #9 –
Thanks for the great responses.  After my original post I actually left the house and went to my closest NAPA. They matched it up. This what they sold me which is what I needed for " my coach".
Tom and Michelle 2004 U270 36WTFS

Re: Fittings for d2 air governor

Reply #10 –
Not sure why you'd need new fittings.  I swapped my D2 out in less than 30 minutes...all compression hose adapter fittings removed from old D2 and replaced on new D2 with sealant...just make sure you get the proper fitting in the correct hole in the new D2...one at a time worked.  Woody.
2001 4010 U320 build #5865 "Bluto-d-Bus" since 09/18
2006 Honda Element ESP Toad
Full timing since 2016 in Western MT
Copilot: Sitka
1975 GMC 260 Avion: sold

Re: Fittings for d2 air governor

Reply #11 –
Quote from: Woody & Sitka –
Not sure why you'd need new fittings.  I swapped my D2 out in less than 30 minutes...all compression hose adapter fittings removed from old D2 and replaced on new D2 with sealant...just make sure you get the proper fitting in the correct hole in the new D2...one at a time worked.  Woody.

It's a good idea to use the fittings in a spare D2 to make for a quick change out. That's what I carry. Because the plugs have to be matched up also
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Fittings for d2 air governor

Reply #12 –
I explained why in original post. I feel like it would be more convenient. To have the spare already set up with the plugs and fittings. If I had a failure on the road. I guess it's just my preference. As always do what makes you happy😀.
Tom and Michelle 2004 U270 36WTFS
 

Re: Fittings for d2 air governor

Reply #13 –
Just for giggles, I put small colored zip ties on fitting and line where I removed it for easy replacement.  Not a bad idea to have a ready to go spare with fittings already on the D2.  Smart planning!
Joe & Dottie Allen
Sold!  December 2023.      2000 U320; build # 5645
Our coach " Maxine"
Motorcade #  15922;  Escapee 150950; FMCA F330833; Boondockers Welcome;  Harvest Hosts;  Thousand Trails
'98 U320 from 2000-'06
USAF '62-'66

"Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for." ―Epicurus