Skip to main content
Topic: cruise control will not work, checked brake for interferance (Read 603 times) previous topic - next topic

cruise control will not work, checked brake for interferance

1998  u320 42 ft. any thoughts thanks romster

Re: cruise control will not work, checked brake for interferance

Reply #1
Check and see if your retarder is on with the joy stick back a notch.  It will kick out the cruise too.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: cruise control will not work, checked brake for interferance

Reply #2
A quick check on the cruise  control whether it works or not . is to start engine turn on cruise control and hid set, this will activate your high idle . So if idle picks up it works .
Keep park brake on and in neutral while doing this check, 
Rob Barb & Pyper
2002  U320  40'
2010 Suzuki Grand Vitara

Re: cruise control will not work, checked brake for interferance

Reply #3
Make sure all the bulbs and the brake light switch are working and bulbs not burned out.
Peter & Beth Martin
No Forrest? What have you done?
MC# 15890 until Dec 2016; FMCA #F329677
Cincinnati, OH

Re: cruise control will not work, checked brake for interferance

Reply #4
Three years ago the cruise control quite working, as well as all of the functions on the VIP steering wheel.  I cleaned the contact ring on the steering wheel and the problems went away.  Also, with my coach, the master 12 volt switch in my entry stairwell has to be on for the VIP functions to operate.
Gary
Gary Vanhoff
1998 U320
3600 WTFE
Build No. 5342
2007 HHR Toad
Spokane Valley, Washington

Re: cruise control will not work, checked brake for interferance

Reply #5
I've had my cruise control and other VIP functions stop working during a trip.  Pulled over, shut off and restart and all was well.  NOTHING short of that worked to get it going again though.

Re: cruise control will not work, checked brake for interferance

Reply #6
It sounds like your problem is the same as the problem that I encountered three years ago.  It was so long ago that I don't remember exactly what I did to gain access to the contact ring, but it was very easy, or I wouldn't have attempted the repair.
Gary
 
Gary Vanhoff
1998 U320
3600 WTFE
Build No. 5342
2007 HHR Toad
Spokane Valley, Washington

 

Re: cruise control will not work, checked brake for interferance

Reply #7
I'm thinking, that if you forget to comb your hair to the cruise control spec, the thing won't work..!
A pure pain in the butt design IMO.

Yep, mine has not worked for too long a time (& I'm supposed to know what's going on.. not.)  pc
S/W Houston 95" U320C SE/40' 
Build #4778  Cummins M11
Repairs & Covered RV Parking (BAO)
PPL is close..