Skip to main content ↑ ↓
Topic: HWH Six Pack Solenoid (Read 566 times) previous topic - next topic

HWH Six Pack Solenoid

As others have done, I'm going to replace the two valve body O-rings on each of my rear solenoids. I've read Steve's and others' write ups but have a question. Once you remove the outer nut and the solenoid housing what tool do you use to unscrew the valve body from the housing? Channel locks? Little chain wrench? Which is easiest, working from the bottom up or top down? Thanks.
jor
93 225
95 300
97 270
99 320

Re: HWH Six Pack Solenoid

Reply #1 –
Use the channel locks.
clean up the surface and use plumbers grease on the new o rings.
John Duld
1995 U320C SE 40'

Re: HWH Six Pack Solenoid

Reply #2 –
Quote from: jor –
As others have done, I'm going to replace the two valve body O-rings on each of my rear solenoids. I've read Steve's and others' write ups but have a question. Once you remove the outer nut and the solenoid housing what tool do you use to unscrew the valve body from the housing? Channel locks? Little chain wrench? Which is easiest, working from the bottom up or top down? Thanks.
jor
I used channel locks and a vice grip to unscrew them. But someone just sent me a link to a tool to use. NOS 16666 NOS Nitrous Solenoid Wrench  NOS Nitrous Oxide Solenoid Wrenches 16666NOS - Free Shipping on Orders Over...  I was told the "O" Ring is #019. The other 2 are are #015 & #028
The selected media item is not currently available.Barry BEAM #16014
2003 U320 40' AGDS
Beamalarm, Foretravel technical help and specifications
"Whatever the mind can conceive and believe, it can achieve"

Re: HWH Six Pack Solenoid

Reply #3 –
Thanks John and Barry. I'll pick up some plumber's grease and I just ordered that tool.
jor
93 225
95 300
97 270
99 320
 

Re: HWH Six Pack Solenoid

Reply #4 –
jor, keep us updated on how well the tool works. We all need new tools :))

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318