Skip to main content ↑ ↓
Topic: Water pump relay location for a 1993 U280 (Read 419 times) previous topic - next topic

Water pump relay location for a 1993 U280

Subject says it all. Water pump is inoperative, circuit breakers OK. Anyone know where the relay in a 1993 U280 is located? No panic for now as I hooked up to park water while looking for the problem, but I hate hooking up to park water..... a flood waiting to happen as water is my nemesis.

Roland
1993 U280 4341
2010 Jeep Liberty
The Pied Pipers

Re: Water pump relay location for a 1993 U280

Reply #1 –
did you check the 12 Volt fuses on the panel under the bed...
Doug W.
96 36' U270 CSGI #4946
04 Toyota Tacoma 4x4
PNW

Re: Water pump relay location for a 1993 U280

Reply #2 –
Roland. How you doin? Is there 12V steady at the pressure switch? I would suspect the pressure switch first.
1994 U280, Build 4490
Deming, NM.

Re: Water pump relay location for a 1993 U280

Reply #3 –
Quote from: Roland Begin –
Anyone know where the relay in a 1993 U280 is located?

Roland - My wiring diagram shows the water pump relay is on the 12 volt panel in the middle storage bay.  The one behind the white fiberglass cover, where you also find the 3 big round 90 amp circuit breakers.  There are also two vertical rows of circuit breakers.  One row has 3, the other row has 4.  In the row of 4, the bottom one is power for the water pump.  Hopefully yours is the same...

In the photo, the panel is on the wall just to the right of the battery charger/converter:
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"
 

Re: Water pump relay location for a 1993 U280

Reply #4 –
Thanks Chuck, will have to check it out tomorrow, hope it not be the pump that be a pain.

Roland
1993 U280 4341
2010 Jeep Liberty
The Pied Pipers