my 1992 U225 hwh leveler will not come down

July 20, 2015, 07:57:43 pm

After my accident of wheel falling off of passenger right side front and dragging on the hwh leveler a fitting broke, I replaced the fitting..... first try the cylinder extended in the up position, and never not kicked down.
No leaks. any ideas?
I bought a second leveler from a wrecked 1993 u225 and it has 1 hydraulic hose to the cylinder and mine has 2, can I use the replacement cylinder somehow? thanks again for all of your help

Re: my 1992 U225 hwh leveler will not come down

Reply #1 – July 20, 2015, 09:45:52 pm

First thing to do is check that the wire attached to outside of cylinder is there and good ground connection thru it. I think these are the 610 models and they use a ground connection to signal the ups and downs. There is a Mercury filled link on them if I remember right.
Look for the single wire and check it and connection out.
JohnH

Re: my 1992 U225 hwh leveler will not come down

Reply #2 – July 20, 2015, 09:56:13 pm

thanks John !, I will check that... I wondered what was hose clamped with a ground wire

Foretravel Owners' Forum For owners and Fans of Foretravel Motorcoaches September 12, 2025 ...