Skip to main content ↑ ↓
Topic: ADJUSTING THE IDLE WITH THE CRUISE BUTTONS (Read 589 times) previous topic - next topic

ADJUSTING THE IDLE WITH THE CRUISE BUTTONS

Hello Forum folks. I am a little lazy today and busy. I am in the process of traveling this weekend with the gv320.I started the coach last night and raised the idle up to about 850 to help warm her up(a little chilly in the northeast at night) and I went to return her to approx. 675.No luck with any of the buttons. I know my books would probably tell me, but I need to get this down so the coach does not pull through the stop signs and lights. And I guess while we are at it any thoughts as to what folks are setting the idle at in your coaches . This would be with the Cummins ISM450-500 hp, that's what I have in the 2003 gv320.Thanks Bob
Bob/Brenda
2003 GV320 40'
Former 2000 U320 40'
Former 1993 U300SE
2007 GMC Envoy Denali
FMCA #2063 S1

Re: ADJUSTING THE IDLE WITH THE CRUISE BUTTONS

Reply #1 –
Quote from: Bob in CT –
Hello Forum folks. I am a little lazy today and busy.

Forum search (my favorite tool) for cruise idle found

Smart Wheel Increase Idle Speed

Cruise control speed fine adjustment

and a bunch of other threads
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: ADJUSTING THE IDLE WITH THE CRUISE BUTTONS

Reply #2 –
The fast idle will not work in gear. I should say.......it will not go in gear at fast idle. My control is different than yours but I just turn it to "off" to kill the fast idle. The diesel mechanics that worked on the big rigs I used to drive  said to always idle at 1k if parked in order to move the 5 gals of oil through the engine. Whether that is true or not I do not know. But I do.
1994 U280, Build 4490
Deming, NM.

Re: ADJUSTING THE IDLE WITH THE CRUISE BUTTONS

Reply #3 –
THANKS TWIG AND MICHELLE, THANKS FOR HELPING MR LAZY TODAY.BOB
Bob/Brenda
2003 GV320 40'
Former 2000 U320 40'
Former 1993 U300SE
2007 GMC Envoy Denali
FMCA #2063 S1
 

Re: ADJUSTING THE IDLE WITH THE CRUISE BUTTONS

Reply #4 –
Went home last night and followed the directions of you nice folks on the forum and it worked great.Idle now working ok.Heading
for the cost of ct later today.Thanks Bob
Bob/Brenda
2003 GV320 40'
Former 2000 U320 40'
Former 1993 U300SE
2007 GMC Envoy Denali
FMCA #2063 S1