Skip to main content ↑ ↓
Topic: Need help on HWH (Read 763 times) previous topic - next topic

Need help on HWH

I would appreciate any help available.

Noticed that the coach had gone out of level after having moved and leveled  earlier in the day. Started up the engine and manually re-leveled. Shut off the engine and checked the voltage gauge. I wasn't getting any shore power. After checking, the power to the pedestal was gone. First time since we have been here, nearly 2 months. Moved to the spot next to us. 50 amps checked out good. Went to level and nothing showing up on the HWH pad.

What am I missing? Is there a fuse or circuit breaker somewhere?  Could the power loss at the pedestal have done something?

Thanks in advance for any advice.
Larry Warren
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: Need help on HWH

Reply #1 –
Larry,
Check the 12 volt switch by the door. You could have bumped it going in and out with your repositioning to the new site.
If it is off I don't think the HWH control will work.
JD
John Duld
1995 U320C SE 40'

Re: Need help on HWH

Reply #2 –
John,

Just checked, the switch is on.

Thanks

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: Need help on HWH

Reply #3 –
Howdy Larry,
    You might check the cable connection on the back of the keypad.  The plug has worked loose several times, and just have to re-connect.
Good luck, Dave A
Dave and Nancy Abel
'00 U320 36' WTFE  Build #5669
'10 Jeep Wrangler Unlimited Rubicon
Livingston, TX  SKP's Fulltiming

Re: Need help on HWH

Reply #4 –
Larry the big silver box has a couple fuses in it for my year.  Also check your 12 volt fuse panel up front.
2025 Wanderbox Outpost 32 on F600 Expedition Motorhome
2015 Born Free Royal Splendor on Ford 550 nonslide version  for sale
Former Coaches  covering. 360,000 miles
1999 34 U270
2000 36 U320
2001 42' double slide U320
2018 Jeep Rubicon

Re: Need help on HWH

Reply #5 –
Thanks for the fast replies. Dave, it appears that you get the prize. The back clip was loose. When I plugged it in, the travel light came on. Won't be able to check the actual level till this afternoon, but my stress level just dropped about 20 points :)) .

As always, my thanks to everyone on this forum.

Larry Warren
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: Need help on HWH

Reply #6 –
Final report!!!!!!!  HWH works great. Can sleep on a level bed tonight ^.^d

Once again, thanks for the assist.

Larry Warren
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318

Re: Need help on HWH

Reply #7 –
Quote from: ohsonew –
Dave, it appears that you get the prize. The back clip was loose.

I recommend using a very small zip tie to secure the connector to the back of the keypad. BTDT.
J D Stevens
1997 U295 CAI 36' Build #5085
2002 Subaru Outback
Motorcade 16869
Bellville, TX
 

Re: Need help on HWH

Reply #8 –
Thanks J.D. great idea.

Larry
Larry Warren
1996  U320 36' SBID "Lola" sold 2020
Build #4970
Motorcade #18318