Skip to main content ↑ ↓
Topic: low hot water pressure problem solved (Read 545 times) previous topic - next topic

low hot water pressure problem solved

The water temperature mixer attached to AquaHot failed - a small piece of plastic inside broke off - and the only symptom was low hot water pressure.  Replaced the mixer and all is well.  Hope this helps someone else.
Larry Rubin
2004 U295 38' build 6278
2014 Jeep Cherokee

Re: low hot water pressure problem solved

Reply #1 –
Larry, I have the same low hot water pressure. Where did you purchase the mixing valve from?
2000, U320 36' with Cummins 450, Toad - 2016 Ford CMax Energi
Previous MHs; 1970 Winnebago, 1973 FMC 2900R, much later a heavily modified 1975 FMC 2900R.

Re: low hot water pressure problem solved

Reply #2 –
I bought mine here and just used the parts not the housing. Works fine

Watts Mixing Valve, Lead Free Brass 1/2 LF70A-F | Zoro.com
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean
 

Re: low hot water pressure problem solved

Reply #3 –
Zoro.com is another great resource the on-line shoppers should have on their favorites list.
Roger Engdahl and Susan Green
2001 U320 3610 #5879 (Home2) - 2014 Jeep Cherokee or 2018 F150
Hastings, MN