Skip to main content ↑ ↓
Topic: Either start on 1994 6v92 (Read 403 times) previous topic - next topic

Either start on 1994 6v92

I don't want use it, looking for the dash control, so I can use the signal wire in the engine bay for something else
George Ray 1992 U280 40'

Re: Either start on 1994 6v92

Reply #1 –
I don't have one on my 1993 U300. I think I remember someone saying that our engines didn't have them. Might try the search function.

There are extra wires running back to the engine that end near the switch panel, and there is an empty switch, so maybe you can use one of those wires and that switch for your project.

Re: Either start on 1994 6v92

Reply #2 –
Quote from: George –
Ether...looking for the dash control...
On our '93 U280, the ETHER rocker switch is on the left-side panel, straight down from the headlight switch, and to the left of the parking brake knob.  It is a "momentary" switch.  If you want to control something that requires a constant signal, you'll have to swap it out for a ON-OFF type.
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: Either start on 1994 6v92

Reply #3 –
There's no switch showing there
George Ray 1992 U280 40'

Re: Either start on 1994 6v92

Reply #4 –
No ether on my '91 6V92.
John Fitzgerald
1991 U300 (SAI) Side Aisle Island Bed 40'
Detroit 6V92 with Allison Retarder
Meridian (Boise), Idaho
 

Re: Either start on 1994 6v92

Reply #5 –
Since our '93 has a Cummins, perhaps the ether was only offered on certain engines...and not on the 6V92?

Found a photo of my switch:
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"