Skip to main content ↑ ↓
Topic: Window Latches Need Replacing (Read 1929 times) previous topic - next topic

Re: Window Latches Need Replacing

Reply #25 –
@John,

I used a plastic pry bar and push it between the windows to put pressure on the back of the screw set. That worked on some of the windows. The others I had to pull the windows track out, remove the window, and drill out the backside of the screw set.

see ya
ken
The selected media item is not currently available.ken & dori hathaway & Big Agnes
🍺1992 U300 GrandVilla WTBI #4150 FOT FBP 2011
✨6V-92TA DDEC Parlor Coach 350HP Series 92
🏁2011 Nissan XTerra Pro-4X
 

Re: Window Latches Need Replacing

Reply #26 –
Quote from: John44 –
Jerry,my latches have the screw but the nut turns and you cannot hold it,how did you get the old latch out?
After the window was out, I used ordinary pliers with one side on the nut and the other side on the latch at a bit of an angle so as to get a screwdriver on the screw.  Applied pressure to the nut that way while turning the screw with a phillips screwdriver.  It was a bit tricky, but managed to do it without slipping and breaking the glass.  Not all the screws required that.  Not sure if there was threadlock on the screws or just corrosion that made the nut rotate with the screw.  I didn't put threadlock on the new screws and nuts.  A glob of hot melt glue on the nut and glass might be able to hold it, but I didn't try that.
Jerry Whiteaker former owner 96 U270  36' #4831 Austin,TX-Owner Mods LCD TV w/front cabinet rebuild - LCD TV bedroom - Dual Central AC, either can cool coach w 30 amp - Skylights at roof AC openings - Drop ceiling for ducting of AC - Shower skylight white gelcoat/wood/epoxy frame - Air Springs/Shocks replaced - 2014 CRV - 8K Home Solar - Chevy Volt