Skip to main content ↑ ↓
Topic: What chassis/brake grease is recommended?  (Read 1234 times) previous topic - next topic

What chassis/brake grease is recommended?

I just greased my output spline with dark Mobilgrease XHP222 Special 14.1 oz Cartridge which has .75 percent moly...and then ordered a flex hose pistol grip Lincoln gun...what a mess.  Is there a best grease for the chassis...or is any moly extreme non synthetic grease ok.  (I can buy this Mobile grease for $4 tube locally) Also...can someone point to the correct clay based brake grease on say Amazon.  I want to do the entire coach...even though it was done several thousand miles ago with some red grease...probably by Cummins...by the previous owner.
Carl and Kathleen
Killeen Texas
1997 U270

Re: What chassis/brake grease is recommended?

Reply #1 –
Mobilegrease XHP 222 is NLGI-2 compliant.  According to Beamalarm.com, it is a satisfactory chassis lube:

http://oilgroupbg.com/pdf/mobil/mobilgrease-xhp-222.pdf

Chassis Lubrication U270 - U320

Air Disk Brakes Lubrication

Product: A 1779W283
1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

Re: What chassis/brake grease is recommended?

Reply #2 –
For the brake calipers I used Mobiltemp SCH32

Mobil SHC 32 Synthetic Grease -Buy Mobil SHC 32 Online
Justin & Cathy Byrd
1995 U280 "Old Faithful"
36' Build #4673
C8.3 Cummins
Allison MD3060R 6 speed - retarder
Powertech 10KW  4cyl Kubota

Re: What chassis/brake grease is recommended?

Reply #3 –
Any NLGI - 1 compliant lube will work for the brakes.  When we went through this issue a couple of years ago we used what Meritor recommended.  Clay based.

NLGI consistency number - Wikipedia, the free encyclopedia
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320

Re: What chassis/brake grease is recommended?

Reply #4 –
Brakes only need to be greased about every 100,000 miles.  Much bigger problem over-greasing.
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R

Re: What chassis/brake grease is recommended?

Reply #5 –
Quote from: amos.harrison –
Brakes only need to be greased about every 100,000 miles.  Much bigger problem over-greasing.

Agreed, OR using the incorrect (like chassis) grease.  If you do not do your own chassis greasing, were it me, I would replace the grease zirks on the brakes with blind plugs!
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: What chassis/brake grease is recommended?

Reply #6 –
Instead of going all the way, and removing zerks, we put a small cable-tie on each zerk and did not cut off the end, to bring attention to these zerks.  But then if we are not greasing the chassis ourselves, we have only used MOT to lub the chassis.

Re: What chassis/brake grease is recommended?

Reply #7 –
I just wonder if too much is made of this special grease requirement. Isn't the main issue heat and don't modern greases handle heat very well? We had a coach's brakes greased improperly and I had it fixed but always wondered if it was really necessary. I'm betting there are a bunch of Foretravels running around with chassis grease in those brakes and none the wiser.
jor
93 225
95 300
97 270
99 320

Re: What chassis/brake grease is recommended?

Reply #8 –
Just came across this post and now have that sinking feeling. Last year had mobile tech come to change oil , came back from shower block to find him crawling about with grease gun !!!!
I am thinking he probably hit the brakes with same grease , what should I do now
Jimmy
2003 U295 3620

Re: What chassis/brake grease is recommended?

Reply #9 –
Quote from: Jimmyjnr –
what should I do now

Find out what kind of grease he used, then see what temperature it's rated for.  You may be fine.
You can contact him and ask if he lubed the calipers, or crawl under and remove the zerk(s) and with a toothpick or something similar find out what's in there.

I use Lucas Red & Tacky on everything I own, with good results.  I have been using it since I saw wheel bearings being packed with it at a big truck place. 

http://lucasoil.com/pdf/TDS_Red-Tacky-Grease.pdf

Re: What chassis/brake grease is recommended?

Reply #10 –
When it comes to brake lube (or not to lube) two things are important:

1. The proper grease (high temp-- clay base grease recommended by brake manufacturer).

2. The proper procedure for greasing and more importantly, to "bleed" the grease so that it does not cause the brake pads to hang up.

All very well discussed here and in the shop manual.
Brett Wolfe
EX: 1993 U240
Moderator, ForeForum 2001-
Moderator Diesel RV Club 2002-
Moderator, FMCA Forum 2009-2020
Chairman FMCA Technical Advisory Committee 2011-2020

Re: What chassis/brake grease is recommended?

Reply #11 –
Not sure if I contact him I will get much information.
My initial thought was new grease gun and tube of correct grease and see if I can pump and purge it through?
Is this a DIY job?
Jimmy
2003 U295 3620

Re: What chassis/brake grease is recommended?

Reply #13 –
Quote from: Jimmyjnr –
Not sure if I contact him I will get much information.
My initial thought was new grease gun and tube of correct grease and see if I can pump and purge it through?
Is this a DIY job?

The toothpick would be my first choice.  Maybe he didn't lube the brakes, or maybe he lubed everything with
clay based.

Re: What chassis/brake grease is recommended?

Reply #14 –
I am going to assume he hit the brakes with ????? , but almost certainly didn't purge them .
Will try to find manual on brakes today and figure out if it's a job I can handle.
Jimmy
2003 U295 3620

Re: What chassis/brake grease is recommended?

Reply #15 –
Just looking through receipts and found the guy that did last service, also found a number of records from PO including one for locked up rear brake!!!!  , then others for full chassis lube from various shops.
I think I need to get to ground zero,buy correct grease and "help" an experienced brake guy do the job properly
Jimmy
2003 U295 3620

Re: What chassis/brake grease is recommended?

Reply #16 –
We spend thousands of dollars to by the best coach we can, with something as important as brakes why would you use anything other than what the MFG specs, it is to easy to get the correct lube from Meritor then there are no questions about what lube was used.
Just my opinion.
The selected media item is not currently available.Bill&Doris 97 U270 36'
University of Parris Island Class of 66
Semper Fi  Build# 5174 MC#17094

Re: What chassis/brake grease is recommended?

Reply #17 –
Remember, greasing the brakes is a once every 100,000 mile service.  So many brake systems have been damaged by over-greasing with the wrong grease.  We should grease everything else every 6 months but leave the brakes alone, preventing "experts" from screwing them up by either removing the zerk fittings on the brakes or zip tying them.
Regards,
Brett

'99 42' Foretravel Xtreme
'14 Brown Motorsports Stacker
'05 Chevy SSR
'02 BMW R1150R
 

Re: What chassis/brake grease is recommended?

Reply #18 –
I had a rear rotor that had been eaten up.  After 2 different shops (1 a second time), almost burning down/up the coach with overheated dragging brakes, and about 6 coach bucks, I finally got coach to MOT and they installed new pins, installed correct grease which ended my brake hell.  I feel the first guy when he replaced the rotor and pad, greased the brakes with the wrong grease which started causing different calipers to start to drag.
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago