Skip to main content
Topic: IFS Safety Blocking  (Read 203 times) previous topic - next topic

IFS Safety Blocking

I have a 2001 36' U320 that I want to do some servicing on. I've got my 2in square tubing and know where to block on the rear of the coach. I was hoping that someone with an IFS front could tell/show where and what to use for keeping the coach up in the raised position so I can safely get underneath. TIA.... James
2001 36' U320 Build 5901
2001 LX470

Re: IFS Safety Blocking

Reply #1
James,

I found a single repeat of your question that was asked two years ago, and sadly never received an answer.  I HOPE we can do better this time...

Working Safely around your Foretravel  (Reply #110)

Something to check while you are working on your front end:

Bad noise in front end. 2001 U320--Update

1993 U280 SE 40' WTBI, Build: 4359
C8.3 300hp, 6-Speed, Exhaust Brake
960 watts on the roof (6 x 160)
Sorento (or BOLT) on a Kar Kaddy SS
"Nature abhors a vacuum"

 

Re: IFS Safety Blocking

Reply #2
I went and bought some 2x12 lumber. Cut in 2' sections.  I then raise front with air bags. then slide /stack the 2x12's under the front cross members.  On my coach I have two front cross members.  I use one set of blocks across both cross members at each side close to the A Arm.  I was concerned about the weight and tried to distribute it over a greater area.
2014 ih45  (4th Foretravel owned)
 1997 36' U295 Sold in 2020, owned for 19 years
  U240 36' Sold to insurance company after melting in garage fire
    33' Foretravel on Dodge Chassis  Sold very long time ago