Skip to main content
Topic: Aqua Hot wiring on a non-aqua hot coach (Read 487 times) previous topic - next topic

Aqua Hot wiring on a non-aqua hot coach

The picture below shows underneath the coach on the board - there is a label for aqua hot wiring.  Our U275 doesnt have that option.  This wire was inconveniently located and had to be snipped to remove the inverter.  Without testing everything individually - does anyone know if we need to reattach, is there a possibility it was used for something else?  Or am I safe to coil this up and secure? No reason to think there are any applicable post factory mods that would have used this.
James
w/ DW Erin, sons Gideon and Tobias, cats Oscar & Oliver
Fulltime 1999 U270 34' #5508

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #1
Whoops forgot the picture.
James
w/ DW Erin, sons Gideon and Tobias, cats Oscar & Oliver
Fulltime 1999 U270 34' #5508

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #2
You might try temporarily restoring the connection through an Amp meter to see if any current flows. If so, it is connected to and powering something. I have no idea what.

Do you have the schematics? 
Tom Lang K6PG (originally  KC6UEC)
and Diane Lang
2003 38 U295 build 6209
2016 Jeep Grand Cherokee Summit Ecodiesel
still have tow-ready 2006 Acura MDX 
Temple City, California
Motorcade 16681 California Chapter President
SKP 16663 member of SKP Park of the Sierra, Coarsegold California
FMCA F071251
Retired electrical and electronic engineer

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #3
Be sure to check your furnace operation also. 
"Not so  long ago we were a nation of risk takers, riding five million pounds of  thrust straight into space."  Joe Gresh
Chuck Pearson
1996 U295
2018 Can Am X3 TurboRS

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #4
Good suggestion on furnace.  Works fine.  I have the schematics, and went there first - but found no mention of aqua hot on the U270-specific schematics.  It may well be there though, but I don't have skilled eyes.

Guess I'll just leave it as-is, and if I find something not working in a week - I'll know where to look first.
James
w/ DW Erin, sons Gideon and Tobias, cats Oscar & Oliver
Fulltime 1999 U270 34' #5508

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #5
Although uncommon, aquaHot was available as an option on all models, including U270's.

If you have three diesel exhaust pipes, you have AquaHot. If you have a visible furnace exhaust and water heater, you do not.
Tom Lang K6PG (originally  KC6UEC)
and Diane Lang
2003 38 U295 build 6209
2016 Jeep Grand Cherokee Summit Ecodiesel
still have tow-ready 2006 Acura MDX 
Temple City, California
Motorcade 16681 California Chapter President
SKP 16663 member of SKP Park of the Sierra, Coarsegold California
FMCA F071251
Retired electrical and electronic engineer

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #6
I definitely have no aqua hot.  Wouldn't that be a nice surprise to discover, though!
James
w/ DW Erin, sons Gideon and Tobias, cats Oscar & Oliver
Fulltime 1999 U270 34' #5508

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #7
I have seen that breaker used for the basement freezer option and to feed the basement TV 12VDC power port.

Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #8
Doesn't look like a Foretravel termination. Someone added something sometime.
Dave W. (AKA Toyman )
'03, 270, 36', Build 6095, Pulling whatever I hook it to.

"Don't cry because it's over. Smile because it happened."
Dr Seuss

 

Re: Aqua Hot wiring on a non-aqua hot coach

Reply #9
Doesn't look like a Foretravel termination. Someone added something sometime.

Good point - I hadn't even considered the visual difference.  Thanks.  Then I guess we had better put this thing the back the way it was.
James
w/ DW Erin, sons Gideon and Tobias, cats Oscar & Oliver
Fulltime 1999 U270 34' #5508