Skip to main content ↑ ↓
Topic: ABS control module location and how do you do a reset (Read 540 times) previous topic - next topic

ABS control module location and how do you do a reset

Uh-oh read about the red abs warning light coming on so my coach decided to follow suit and lit hers up.  Happened to be heading to Creative Coach for another issue and they found the front wheel sensors were loose.  The issue developed when they couldn't find the control module to do a reset.  Foretravel factory thought it was in the bay with the aux air compressor on the back wall.  Not to be found.  Any help on how to do the reset and where the module is located would greatly be appreciated.  Thanks in advance.

Re: ABS control module location and how do you do a reset

Reply #1 –
Art,
Is there a fuse in the fuse block for the ABS?
If there is you might try to reboot the system by removing and reinstalling it after around 30 seconds.
John Duld
1995 U320C SE 40'

Re: ABS control module location and how do you do a reset

Reply #2 –
Good thought I'll have to check at location I imagine that would be automotive.

Re: ABS control module location and how do you do a reset

Reply #3 –
Quote from: Art & Polly –
The issue developed when they couldn't find the control module to do a reset.  Foretravel factory thought it was in the bay with the aux air compressor on the back wall.  Not to be found.  Any help on how to do the reset and where the module is located would greatly be appreciated.  Thanks in advance.



Not sure in a 2002, but look on the back walls of half-deep bays for a silver box that says Wabco on it.  I'm only familiar with a 2003, but in that case it is second bay from the front axle on the driver's side, same bay that houses the inverter, transfer switch, aux compressor, HWH "cans", and 12V resettable breakers.
Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320

Re: ABS control module location and how do you do a reset

Reply #4 –
Thanks Michelle That is exactly where Foretravel said it was but I must be blind in one eye and can't see out of the other.  I took pics of those compartments and sent to Foretravel They must still be studying them because I haven't heard back for 8 days.  I'll keep looking I found an aluminum box buried behind the vacuum generator for my toilet, but I think that is for the Allison.
 

Re: ABS control module location and how do you do a reset

Reply #5 –
Quote from: Art & Polly –
Thanks Michelle That is exactly where Foretravel said it was but I must be blind in one eye and can't see out of the other.  I took pics of those compartments and sent to Foretravel They must still be studying them because I haven't heard back for 8 days.  I'll keep looking I found an aluminum box buried behind the vacuum generator for my toilet, but I think that is for the Allison.

Post the photos here - maybe one of us can help you.  Here is what the one in a 2003 looks like - back wall near the slide manifolds; it's the silver box that says Wabco and is mounted so "Wabco"  is upside down.

The selected media item is not currently available.
Yes, the silver box near the vacuum generator is likely the Allison ECU.

Learn every day, but especially from the experiences of others. It's cheaper!  - John C. Bogle

2000 U320 36' non-slide / WildEBeest Rescue
2003 U320