Skip to main content ↑ ↓
Topic: MOT Upholstery project complete (Read 926 times) previous topic - next topic

MOT Upholstery project complete

We had Trina at MOT upholstery shop put new thinner but firmer foam in our dinette booth seating.  Her work and her attitude is superb.  It not only looks great, but is also much more comfortable.

I highly recommend MOT upholstery shop for your needs.  They are on the opposite side of the highway  from MOT sales, in the newer building over by the MOT "campground".  Note:  We were also able to use the advertised 20% off on upholstery labor currently in effect.

All our work and shopping in Nac is now complete, so we pull out on Sunday.  We used parts department at FOT, coach service at Old Town, and upholstery at MOT.  Happy with all three.
Dan - Full timing since 2009
2003 U320 40' Tag 2 slide

Re: MOT Upholstery project complete

Reply #1 –
Dan, how about some pictures of your dinette?

Did you notice how they released the cushion to remove it for upholstering?

Re: MOT Upholstery project complete

Reply #2 –
Quote from: Travelin' Man –
Dan, how about some pictures of your dinette?

Did you notice how they released the cushion to remove it for upholstering?


I only saw how they unbolted by removing the drawers.  Taking the drawers out revealed lag bolts under one booth seat, and through bolts into unseen nut retainers for the other booth seat.

Our dinette seating is not the original factory booth.  It was an updated design by the previous owners.  It is more complex in it's "pieces parts" than the factory booths we have seen at FOT/MOT.  Due to that, this re-upholstery job was more difficult than the originals would have been.  We were offered one option during re-upholstery that would have no wrinkles in the back at all, or a bit more wrap around with minor wrinkles and more comfort.  We elected the more comfort option.

I'll take some pics later today if you want them.
Dan - Full timing since 2009
2003 U320 40' Tag 2 slide

Re: MOT Upholstery project complete

Reply #3 –
Thanks Dan.

The pix aren't necessary, but everyone wants to see your new seats.

Re: MOT Upholstery project complete

Reply #4 –
Pictures:
Dan - Full timing since 2009
2003 U320 40' Tag 2 slide

Re: MOT Upholstery project complete

Reply #5 –
Trina has done some good work for us too.  😁
Scott & Carol Seibert
2001 42' double slide U320 - Sold
Previous - 2002 36' U320

Re: MOT Upholstery project complete

Reply #6 –
Dan,

That sure is an inviting area! Pretty design and a beautiful choice of coverings. Thanks for the views.
Paul & Kathleen
1995 U320c SE 40'
Build 4681 --Cummins M11 /17511
"That Irish Girl"
Red MINI " 40"

Re: MOT Upholstery project complete

Reply #7 –
Trina was at another shop seven years, brought a great talent to MOT remodeling
Mike
2001 U320 4010 Build 5878 (Gus)
Wrangle Unlimited Toad
Nacogdoches
 

Re: MOT Upholstery project complete

Reply #8 –
Quote from: AC7880 –
We had Trina at MOT upholstery shop put new thinner but firmer foam in our dinette booth seating.  Her work and her attitude is superb.  It not only looks great, but is also much more comfortable.

I highly recommend MOT upholstery shop for your needs.  They are on the opposite side of the highway  from MOT sales, in the newer building over by the MOT "campground". . .
I second this commendation.  While I was in NAC for some other work Trina redid the arms on my Erkones stressless recliner.  She matched the chair's leather with some ultra leather they had available and reupholstered both arms for less than $200 total (with me doing the removal/installation).
Regards

1997 U295 40 with CAT 3126