Skip to main content ↑ ↓
Topic: Diagnostic Port - is this it? (Read 408 times) previous topic - next topic

Diagnostic Port - is this it?

1998 U-320 M11 Celect Plus.

In a different thread I was asking about engine coolant temp while climbing grades.  Replies were very helpful and suggested using Silverleaf or Scangauge D for more accurate gauge readings.  Silverleaf and Scangauge use either a J1708 or J1939 diagnostic port.

In the photo below, is this the J1708 6-pin diagnostic port I would use for these systems?  It's under the dash on the left side.

Thank you,
Chris

Re: Diagnostic Port - is this it?

Reply #1 –
Chris,

Yes, that is where I have my VMSpc adapter inserted. My laptop is running the VMSpc software.

VMSpc | SilverLeaf Electronics, Inc.

Have Fun,
Bob

Bob & Suzy
2000 U320 4010 SPEC
2006 Honda CRV

Re: Diagnostic Port - is this it?

Reply #2 –
Bob,

Thank you.

Chris
 

Re: Diagnostic Port - is this it?

Reply #3 –
Chris you are welcome.  I can give you a long list of coach bucks to invest into things in the coach

"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4