Skip to main content ↑ ↓
Topic: Fresh Water Servo Valve (Read 675 times) previous topic - next topic

Fresh Water Servo Valve

Apparently my electrically operated fresh water valve is sticking and will not allow me to fill the water tank.  I have read before here on the forum that often a bit of a rap on the valve will jostle it free.  My question is, "Where is the servo valve located on my 1999 U320?"  I looked behind the panel in the street side water bay but it appears that the water line runs directly from the hose reel to the other side of the coach.  I looked behind the panel that covers the water manifold on the curb side but do not see it there.  Actually I do not know exactly what I am looking for but assumed I would recognize it whenever I saw it. 

Have run out of water and it is cold outside so any help would be appreciated.  Thanks
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.

Re: Fresh Water Servo Valve

Reply #1 –
It's on the curb side where the water pump is.
1999 40 ft. U-320 wtfe build 5563 Chuck & Lynda's "Rollin' Inn"  2030 watts solar
prev. mh's 71 GMC 5 yrs. 73 Pace Setter 1 yr. 78 Vogue 5 yrs 81 FTX 40ft all electric 18 yrs. 1996 Monaco Signature 3 yrs.
2014 Grand Cherokee Overland
Dream as if you will live forever. Live as if you will die today.  James Dean

Re: Fresh Water Servo Valve

Reply #2 –
Thanks Craneman, I was looking right at it and didn't recognize it. 
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.

Re: Fresh Water Servo Valve

Reply #3 –
Quote from: Jan & Richard –
Actually I do not know exactly what I am looking for but assumed I would recognize it whenever I saw it. 

Richard,

Here is a link to a post that will help you identify what you are looking for and what you need to do to open it up if a repair is needed.  Water Fill Valve Issues

Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Fresh Water Servo Valve

Reply #4 –
Richard,

You may also need to check your water fill solenoid as it may be stuck or dead.  Here is a resent thread that deals with that issue read through this for some good info on repairs Water Fill Solenoid relay

Pamela & Mike
Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."

Re: Fresh Water Servo Valve

Reply #5 –
Next question:  Should the metal peg pop up when the servo is activated?  I checked and am getting good 12 volts to the servo when the water fill switch is activated but I still cannot get water to flow into the tank. 
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.

Re: Fresh Water Servo Valve

Reply #6 –
Quote from: Jan & Richard –
  Should the metal peg pop up when the servo is activated? 

Are you referring to something on the fill valve? There should be nothing on the fill valve that moves to indicate that it is open. If you have an indicator on your fill valve you may have one of the new style valves that has been installed that is used on newer model coaches.

Pamela & Mike

Pamela & Mike 97 U 320

"It's not what happens to you, but how you react to it that matters."
 

Re: Fresh Water Servo Valve

Reply #7 –
Problem solved, life is good again.  I removed the valve from the system, disassembled and cleaned it thoroughly and put it back together again.  Thanks again for all the help on the forum. 
Jan & Richard Witt
1999 U-320  36ft WTFE
Build Number: 5478 Motorcade: 16599
2011 Jeep Wrangler Unlimited w/Air Force One
Jan: NO5U, Richard:KA5RIW
The selected media item is not currently available.