Skip to main content ↑ ↓
Topic: Norcold 1210 door gasket (Read 1949 times) previous topic - next topic

Norcold 1210 door gasket

Four door 7 year old Norcold and the door gasket on the lower right door is a bit torn. Local repair says there is no gasket kit and have to replace the whole door for $702 including shipping tax installation blah blah. Anyone have any experience or suggestions?
Larry
1996 U295 36'
Build # 4805
Actually we sold it but just like to lurk

Re: Norcold 1210 door gasket

Reply #2 –
Larry,

You might give Leon a call, or any other place that does RV refrigeration.
Contact Us At National RV Refrigeration
A number of the 1210's have been replaced so someone may have the gasket you need.

Also, look at the profile of it and try to match it up generically.  Another thought is to obtain a
long enough piece of an original that it can be spliced in using super glue on each end.

Good luck.

Re: Norcold 1210 door gasket

Reply #3 –
I have a norcool 841 1 week old door and gasket free
George Ray 1992 U280 40'
 

Re: Norcold 1210 door gasket

Reply #4 –
Hi Mike,

Jus some ideas..  As a temporary repair, have you considered a silicone repair of the torn part? - Waxtex paper and a little time might be of help. Sure beats the big bucks you report.
Also you could put something behind the whole gasket to make it protrude out enough to seal sufficiently. Try pulling a dollar-bill trick to see how much friction your feel pulling it out along the seal when the door is closed.
Jim

2002 U320
Jim Frerichs
2002 U320 42'