Skip to main content ↑ ↓
Topic: Potential refer part replacement  (Read 295 times) previous topic - next topic

Potential refer part replacement

Working on our RM 7832 Dometic refer.  No spark at the burner.  Works on electricity.  Flame lights manually. ,no relight.

Replaced the reignitor coil and the wire ends that attach to it.

Some repair guys mention the spark lead wire.  Internal breaks.  Not available

My shop stocks the dinosaur replacement but I would like to have a spare spark setup.

I think i have seen posted here a replacement later model spark wire and or tip?

Any info here?
"Riding and rejoicing"
Bob
1997 U320 40' Mid entry, build 5132,  wtbi ce27, 4th owner
2007 Solara convertible
2 prodeco tech outlaw ss electric bikes

1095 watts solar
08 Ls 460 and a sc430
2000 Ford F-250 superduty 4x4
 

Re: Potential refer part replacement

Reply #1 –
Take the wire off the sparker and hold it with a pair of insulated needle nose pliers close to a metal ground and see if it sparks. If it does it's just the connection to the sparker. I ran a plain ole red 14 guage wire from the igniter to the sparker.

........or whatever those parts are called.
1994 U280, Build 4490
Deming, NM.